This is default featured slide 1 title

Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.

This is default featured slide 2 title

Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.

This is default featured slide 3 title

Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.

This is default featured slide 4 title

Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.

This is default featured slide 5 title

Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.

Minggu, 08 November 2009

Kap Mesin Toyota Kijang Innova

To open the hood :

1. Pull the lock lever liberator bonnet hood will open a slightly upward.


2. At the front of the vehicle, pull up the handle lever and lift the hood helper.




3. Remove the buffer rod of the clips. This is done by pulling the handle on the buffer rod, as shown in the picture above.


4. Hold the hood to keep it open by inserting a rod into the buffer hole.

Before closing the hood, check to see that you are not rusted tools, wipes, etc.. and return the buffer rod to the brace to prevent knock. Then lower the hood and make sure that the bonnet lock into place. If necessary, press down gently on the front end to lock it.





Tutup Tangki Bahan Bakar Toyota Kijang Innova


This suggests that the refueling door on the left side of your vehicle.

mobil toyota
1.
To open the fuel door, pull the lever upwards. At the refueling stop the engine.

2.
To open the fuel tank cap, turn the lid slowly against clockwise, then paused before opening it. After opening the lid, hanging the lid on the tank cap hanger.

It is not uncommon to hear the hissing softly when the lid is opened. When installing it, turn the cap clockwise until you hear a clicking sound.




Kamis, 05 November 2009

Tutup Tangki Bahan Bakar Toyota Avanza


Harga Avanza 2011

Manual Transmission
Automatic Transmission
This sign indicates that the fuel cap door on the right side of your vehicle.


1. To open the fuel door, pull the lever upwards.

When refueling, turn off the engine.
2. To remove the fuel tank cap, slowly turn the cap counter-clockwise, then pauses before releasing it. After removing the lid, hang on a hanger cap.
It is not unusual when a light blast of sound when the tank lid is opened. When installing, rotate the tank cap clockwise until you hear a clicking sound.










Pintu Belakang Toyota Avanza (Bagasi)

Rear Door Toyota New Avanza (Baggage)
Harga Avanza 2011
Open the back door of Toyota New Avanza


To open the back door from the outside, insert the key and rotate clockwise. Then lift the back door.

See "Caution about the preparation of the trunk" on page 93 in Chapter 2 to find out concerns about carry-on luggage loading.

To close the back door, down and press into bawah.Setelahmenutup back door, try to pull it up to make sure that the rear door is closed completely.

Lock lever liberator



To open the back door of the driver's seat, pull up the lock lever liberator.

Opening Engine Bonnet
Backup Tire Wheels
Fuel Tank Closures

Harga Toyota AvanzaInterior Toyota AvanzaEksterior Toyota AvanzaFitur Keselamatan Toyota AvanzaFitur Kenyamanan Toyota AvanzaSpesifikasi Toyota AvanzaWarna Toyota AvanzaFoto Gambar Toyota AvanzaKredit Toyota AvanzaBrosur Toyota AvanzaPanduan Toyota AvanzaAksesoris Toyota AvanzaWarranty Toyota Baru

Bila Ban Avanza Kempes : Melepas Ban Cadangan

Harga Avanza 2011
when the tires of Toyota Avanza deflate :
  1. Reduce your speed gradually, keep the vehicle straight. Move to the edge of the road safe, away from traffic. Do not stop on the line dividing the highway. Park at the flat and grounded in strong.
  2. Turn off the engine and turn on emergency lights.
  3. Pull the brake lever completely and move the lever to position "P" (automatic) or reverse gear (manual).
  4. Invite all the passengers fell through the safe side.
  5. Read these instructions carefully.


Necessary equipment and spare tires
1. Take the necessary equipment and spare tires.
  1. Equipment bag
  2. Jack
  3. Spare tire
To prepare yourself for emergencies, then you must understand the use of the jack, any equipment and storage locations.
When storing the jack, put the jack into place safely to prevent throwing the jack in the event of a collision or sudden braking.


Play hookup jack by hand.
To disconnect: Turn junction in the direction of the jack 1 to jack free.
To store: Turn the jack on the direction of junction 2 to the jack tied securely to prevent it was thrown forward during a collision or sudden braking.
To save the jack:
  1. Put the arm on top of part B in the bracket, as shown in the picture above.
  2. Adjust the arm so that part A of the bracket is in the arm.
  3. Rotate the junction until the arm is in contact with the bracket.
To remove the spare tire:
  1. Open the back door, you will find the spare tire clamp bolt near the rear door lock. Loosen the clamp bolt spare tire with lock nut.
  2. Lift the tires up a bit and loose clamps terms of its place.
  3. Slowly lower to the ground and place the spare tire off.
When someone broke the rear tires, loose spare tire in the following ways: 1) loosen the clamp bolt spare tire, 2) move the spare tire to the right, 3) push onto the spare wheel, and 4) pull the spare tire from vehicle.
When storing the spare tire, put the spare tire into place with the outer wheel side facing up. Next, tie the spare tire by repeating the stages of the release mentioned above, in reverse order, to avoid throwing the spare tire in the event of a collision or sudden braking.
Block the wheels
2. Chock the wheels on the opposite side of the diagonal with a flat tire, to keep the vehicle does not slide when jacked.
When the jammed wheel, place a wheel chock from front to front and from the rear wheel to rear wheel.

Removing ornaments wheels (steel wheels)
3. Remove the wheel ornaments
Lift-wheel ornament using the flat edge of the wheel lock nut as shown in the picture.